Nonwoven Geotextile-GFP800
Nonwoven Geotextile
- 100% Polypropylene Staple Fiber Needle Punched Non-Woven Geotextile.
- Raw material offers the most stable polymer against chemical / biological attack in groundwater with extreme pH conditions.
- This range of geotextiles offers excellent energy absorption characteristics as well as hydraulic performance.
- Is made from the highest quality Polypropylene Staple Fibers and needle-punched to form dimensional structures, with Acid resistance.
- Is extremely effective in reinforcing and protecting the granular layers, collecting surplus water from the structures and the soil, also providing hydraulic flow and soil retention, which makes them well suited for filtration in subsurface drainage applications.
GFP800 General Application(s):
- Filtration
- Coastal hydraulic works
- Drainage
- Protection of geomembranes in landfill lining systems
| PROPERTY | Unit | TEST METHOD | ENGLISH | METRIC |
|---|---|---|---|---|
| Tensile strength | KN/m | ASTM D 4595 | 40046 lb/ft 30034 lb/ft | 56 42 |
| Tensile Elongation | % | ASTM D 4595 | 60 % 50 % | 60 % 50 % |
| Grab Strength | KN | ASTM D-4632 | 652 lbs 472 lbs | 2.9 2.1 |
| Grab Elongation | % | ASTM D-4632 | 60 % 50 % | 60 50 |
| Trapezoidal Tear | KN | ASTM D-4533 | 236 lbs 202 lbs | 1.05 0.90 |
| CBR Burst Strength | KN(>=) | ASTM D-6241 | 1841 lbs 1524 lbs | 8.19 6.78 |
| Puncture resistance | KN(>=) | ASTM D-4833 | 236 lbs 216 lbs | 1.05 0.96 |
| Flow Rate, 100mm head | L/s/m2 | ASTM D-4491 | 38 L/s/m2 | 38 |
| Flow Rate, 50mm head | L/min/ m2 | ASTM D-4491 | 44 g/min/f² | 1812 |
| Apparent Opening Size O95 | microns ≤ | ASTM D-4751 | 200 US Sieve | 70 |
| Apparent Opening Size O90 | μm≤ | EN ISO 12956 | 140 US Sieve | 105 |
| Permittivity | Sec-1 | ASTM D 4491 | 0.4 Sec⁻¹ | 0.4 |
| UV Resistance Strength Retained @ 500hrs | % | % | 70% | 70% |
| Thickness（2KP） | mm | ASTMD5199 | 0.20 in 0.17 in | 5.01 4.43 |
| Mass per Unit | g/m2 | ASTM D5261 | 23.599 oz/y² | 800 |
| Roll Width | m(≤) | 13.1 ft | 4 | |
| Roll Length | m(≥) | 187 ft | 57 | |
| Approx Load Q’ty / 40’ HQ | Sq. m | 16361 Sq.yd | 13680 |
- (1) Above values are on an average basis, the data was obtained from in-house test laboratory, National test institutes and international test institutes. Geofantex Geosynthetics keeps the right of data changes and the final explanation right.
- (2) Liability Exclusion: This publication should not be construed as engineering advice. While the information contained here is accurate to the best of our knowledge, Geofantex Geosynthetics does not warrant its accuracy or completeness. The only warranty made by Geofantex Geosynthetics for its products is set forth in our Product Test Report accompanies our shipment of the products, or such other written warranty as may be agreed by Geofantex Geosynthetics and the customer.
- (3) Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without agreed by Geofantex Geosynthetics and the customer. Geofantex Geosynthetics specifically disclaims all other warranties, express or implied, including without limitation, warranties of merchantability or fitness for a particular purpose, or arising from the provision of samples, a course of dealing, or usage of trade.
GFP800 Shipping & Packaging Information
| SIZE | DIAMETER | WIDTH | WEIGHT | AREA | ROLLS PER TRAILER |
|---|---|---|---|---|---|
| 4′ x 57′ | 50-55″ | 4′ | 192.4 Kg | 228 m2 | 60 |
GFP800 Industry Product Equivalents
ACF ACF N031, ADS ADS 0311T, BP-Amoco Amoco 4535, Carthage Mills FX-30HS, Contech C-31NW, Crown Resources/TNS Crown R031, Dalco Daltex 1031, EXXON Exxon GTF-125, Hanes Geo TerraTex N03, L&M Supply LM 310, Maccaferri MacTex N11.1, Mirafi Mirafi 135N, Propex Geotex 311, Synthetic Industries SI 311, Skaps Skaps GT131, Thrace-LINQ LINQ 120EX, Willacoochee Industries WINfab 310N
This information is provided for reference only and is not intended as a warranty or guarantee. US Fabrics assumes no liability in connection with the use of this information.
Comments
Post a Comment